Changing Your Dial-up Number Setting
 
You should have selected a local dial-up number for your area during the sign-up process.
If not, you can find your local access numbers here.
You are responsible for selecting the correct local number. Check with your phone company to be sure it is a free local call from your location.

Windows 95/98

• Double Click My Computer
• Double Click Dialup Networking
• Right Click Ligonierweb, and click Properties
• A dial-in number is displayed in the Telephone Number field.
• Type in your access number there, then click OK.

Windows 2000

• Click on Start, then Settings.
• Choose Network and Dial-Up Settings from the Settings menu
• Right Click Ligonierweb, and click Properties
• A dial-in number is displayed in the Telephone Number field.
• Type in your access number there, then click OK.

Windows XP

• Click on Start, then go to Connect To.
• Right Click Ligonierweb, and click Properties
• A dial-in number is displayed in the Telephone Number field.
• Type in your access number there, then click OK.

Macintosh System 7.x

• Open Control Panel
• Double Click Config PPP
• Click Config
• A dial-in number is displayed in the Telephone Number field.
• Type in your access number there, then click Done.

Macintosh System 8.x & 9.x

• Open Control Panel
• Double Click Remote Access
• A dial-in number is displayed in the Telephone Number field.
• Type in your access number there.
• Close the Remote Access window
• When prompted, click Save

Macintosh OS X

• Click on Apple Menu, then System Preferences
• Double Click Network
• Click the PPP tab. A dial-in number is displayed in the Telephone Number field.

Type in your access number there, then click OK.

If you have any difficulties, please call our Tech Support line first 1-877-580-5901.